[youtube https://www.youtube.com/watch?v=ISMmVJxlNvE&w=580&h=385]

Here at Riverside, we’re proud to stock Traeger Wood Fired Grills, including the Traeger Pro Series and Traeger Century Series, the full range of Traeger Pellets and accessories.

For more information visit our Traeger page here:
http://www.riversidegardencentre.co.uk/outdoor-cooking/traeger-wood-fired-grills.html

In this troubleshooting video, you are guided through how to install a Traeger auger on your Traeger Grill.

1. Unplug the grill from its power source and empty the hopper.
2. Remove the temperature controller from the hopper with a Phillips screwdriver and push the controller into the mounting hole of the hopper.
3. Remove the 4 screws holding the hopper to the grill between the grill and hopper. Lift the hopper off the grill and set it aside.
4. Locate the auger motor with red wires, remove the Allen screw and 5/16” nut on the backside that holds the auger onto the auger motor.
5. Unscrew the bolts holding the auger motor and the motor bracket to the burner with a 7/16” screwdriver.
6. Unscrew the auger from the shaft turning it counter clockwise, set the bushing aside.
7. Clean the pellets in the auger shaft by pushing them into the firepot. Vacuum the firepot out and any remaining pellet debris.
8. Place the replacement auger into the shaft and test it to ensure it turns freely.
9. Put the motor bracket/bushing on the end of the auger and push it into the shaft, then secure the auger with the 7/16” screw.
10. Attach the auger motor to the auger with the 5/16” Allen nut and screw.
11. Attach the hopper to the grill and secure the temperature controller to the front of the hopper.

Now, get smoking!

Follow us on Twitter:

Like us on Facebook:
https://www.facebook.com/riversidegardencentre

Our website:
http://www.riversidegardencentre.co.uk

source